Customers compare BWTS10047B to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
There are two options for installing a set of Off-Road Timbren bump stops at the front of your 1997 Toyota Land Cruiser and the correct option just has to do with what series you have: - 70 Series #TABSTOFLC1 - 80 Series #TABSTOFLC1A
view full answer...The height of the #BWTS10047B B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise is 8-1/2." The #BWTS10033B B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise height is…
view full answer...We have exactly what you are looking for. I recommend the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate - 2" Hitch #BW44FR which is designed to work with the MultiPro Tailgate on your 2021 GMC Sierra 1500, and has a…
view full answer...Out of those two options, I recommend the 3" Drop B&W Tow & Stow 3-Ball Mount item #BWTS10047B for your 2019 Ford F-150. Both the 3" B&W Tow and Stow item #BWTS10047B and the 5" B&W Tow and Stow item #BWTS10048B are…
view full answer...To tell if your vehicle has LED lights or incandescent lights, you really need to look at the light bulb itself as the outside lenses can be deceiving. Incandescent lights have a bulb with a filament like #VX-SDH11 where you see the wires making a…
view full answer...If you want to just add on some sort of extension you can use Safety Chain Quick Link #C82932 which has a working load limit of 3300-lbs. This will give you about 3-inches additional length. Ideally trailer safety chains will be one continuous chain,…
view full answer...Thanks for reaching out! The measurements you're asking for on the B&W Tow & Stow 3-Ball Mount #BWTS10047B can be found on the attached image. I'm also linking a review video for you to reference!
view full answer...The Curt Rockerballs like the #C63KR will not interfere with your surge brakes. The movement they allow would not prevent the inertia of your vehicle applying the brakes from activating your surge actuator.
view full answer...In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10047B, so long as you have the hitch balls pointed down there should be no issues stowing the ball platform under the receiver tube. I suppose there could be some odd setups that…
view full answer...We do not offer the Pullrite brand but in my research it does appear to compare to our Demco Hijacker AutoSlide like #DM8550024. Both the B&W and Demco 5th wheel hitches are great for the short bed user. What will make the difference is the…
view full answer...The Demco Recon hitch part #DM8550043 is a well-made fifth wheel hitch that is made here in the USA. I'd put the quality of this hitch up to basically any other hitch manufacturer out there. This hitch weighs 100 lbs which is a bit lighter than…
view full answer...Although there are standard bearing and seal combinations, sometimes (especially on older trailers) the "correct" seal won't fit, as you have found out. The closest seal that we have to the 1.654 Inner Diameter (ID) that you measured is…
view full answer...