Customers compare BWTS10033B to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
There are two options for installing a set of Off-Road Timbren bump stops at the front of your 1997 Toyota Land Cruiser and the correct option just has to do with what series you have: - 70 Series #TABSTOFLC1 - 80 Series #TABSTOFLC1A
view full answer...This is a reason we measure and label our site all the same way rather than going off the description or title from our manufacturers. On the BulletProof Hitches 2-Ball Mount #BPH64FR it is capable of a 4" total drop or 4" total rise. The…
view full answer...Determining how to get the correct rise or drop is actually pretty simple and only requires two measurements. If you get the largest rise and drop you could wind up with more ball mount than necessary. In order to choose the correct ball mount, there…
view full answer...The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise item #BWTS10033B is 6 1/2". I have attached a picture with the dimensions drawn on it.
view full answer...The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise #BWTS10037B in the rise position is 9-1/2 inches from the center of the shank's pinhole to the top of the ball (in the highest position).…
view full answer...Yes, you can set the B&W Tow and Stow Ball Mount part #BWTS10033B to 0 rise if you align the adjustable portion of the ball mount with the shank in the drop position. There is not an offset in drop position it starts at 0 and the increments…
view full answer...The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…
view full answer...From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…
view full answer...The B&W Tow & Stow 2-Ball Mount #BWTS10037B that you referenced will hang down exactly 5-1/2 inches from the bottom of your hitch opening.
view full answer...The B&W Tow & Stow 2-Ball Mount part #BWTS10037B will measure 9.5" from the top of the shank to the bottom of the hitch ball while in the lowest settings.
view full answer...The B&W Tow & Stow 2-Ball Mount #BWTS10033B referenced in your question is designed for 2 inch trailer hitch receivers. As long as you have a 2 inch receiver installed on your truck, this will work great for your 2004 Chevy Silverado. This is…
view full answer...Given your description, you'll need a ball mount with a pretty considerable drop. The best way to determine what sort of drop ball mount you'll need is to determine the height difference between the inside top edge of the hitch receiver tube…
view full answer...