Replacement Venture Lippert Motor Gearbox For Landing Gear on a 36 Foot 2006 Raptor Toy Hauler

Question

Question:

I am looking for a replacement for a venture m-9000PK 12 volt DC 30 amp serial #9000-070988 gear box. it is on a 2006 Raptor 36foot toy hauler. Do you carry one?

asked by: Howard

0

Expert Reply:

The replacement gearbox I recommend for your 36 foot 2006 Raptor trailer is # LG-179015. It is designed to work with landing gear # LG-1 and # LG-183708 but also works with most other brands of landing gear, including Atwood and Lippert, and on your Raptor trailer.

The replacement motor for your landing gear you will need is LG-142178.

expert reply by: Chris B

0

Answer 1

While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle #RVLG-8HDL as this landing gear uses the standard weld mount…

view full answer...

Answer 2

I spoke to Lippert about the Replacement 5-Function Remote Receiver with Replaceable Fuses part #LC305117. They told me that the receiver must receive a minimum of twelve volts on any of the given inputs in order for it to function correctly. That…

view full answer...

Answer 3

I'd go with a powered set of landing gear for your toy hauler as that will make operating them much easier since you'd be just holding down a button instead of having to crank the jacks up and down. For that I'd recommend the Stromberg…

view full answer...

Answer 4

Those are a couple of good questions, and to start, I just want to confirm the correct replacement for your Atwood 75721 motor is the Replacement Motor #LG-142178. Now, in regards to removing the motor, it is extremely simple as literally all you…

view full answer...

Answer 5

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 6

It sounds like you have the Lippert Ground Control leveling system on your Jayco Fifth Wheel. I checked out the error codes and RR Jack means there is an issue with the Right Rear jack on your trailer. In the manual for the Ground Control 3.0 system…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The Blue Ox systems cannot be moved back that far but we do have the perfect system for you. Take a look at the Reese SC weight distribution systems linked to the right (minus the ones that say Light Duty). These systems have narrow brackets that can…

view full answer...

Answer 9

Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…

view full answer...

Answer 10

I added a photo which shows the location of the heating element of the Atwood Water Heater GC6AA-10E for you. It is item number 17 in the diagram. Atwood does recommend having a professional do the job if you are replacing it due to its location.

view full answer...

Answer 11

Most of the time when a tow setup is porpoising with a weight distribution system all you have to do is add a bit more spring bar tension to minimize the porpoising. With an Equalizer system you would need to angle the spring bars down further to add…

view full answer...

Answer 12

The Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs item #LG-142178 you were looking at is the correct replacement motor for the discontinued Atwood 75721. The Gearbox for Venture Electric 5th Wheel RV Landing Gear…

view full answer...