Using Wet or Dry Shackle Bolts in Rear Leaf Spring Hanger of Single Axle Trailer
Question:
Hello, I am planning on ordering these rear hangers for my single-axle trailer. I understand how they should be mounted/welded to the frame. I will be using shackle straps TRSL225 and shackle bolts 166081 for my setup. Is it okay for the dry non-greased/bearingless shackle bolt #166081 to be installed through the hole in this rear hanger? That would leave a metal-on-metal setup and just not sure if Im approaching this correctly... Thank you
asked by: Jeff
Expert Reply:
You can certainly use the 30-20 spring hanger with the # 166081 bolts, or you can use the wet bolts like part # 126B2. The bolt features a grease zerk that would allow you to grease the inside of the bushing. Using the wet bolt would probably make the suspension a bit quieter as well as helping the component to last longer.
Products Referenced in This Question
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- ABS Fasteners
more information >
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Suspension Enhancement
- Search Results: shackle strap
- Search Results: 3500 lb axle and spring kits
- Article: Double-Eye Trailer Suspension System Review
- Search Results: 30~20
- Search Results: aps5
- Shop: Trailer Hitch
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Video: Tuson Electronic Sway Control System Review
- Q&A: Spring Hanger Dimension Recommendations for Installing a e34SR Leaf Spring
- Q&A: Outer Diameter of Bushing on Suspension Hanger Part # 30-20
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Search Results: timbren
- Video: Review of Gen-Y Hitch Hitch Pins and Clips - 5/8" Diameter HItch Pin - GY39FR
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Search Results: aps1
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Video: Review of Dexter Trailer Leaf Spring Suspension - Rear Hanger - 30-61-1
- Q&A: Recommended Suspension Enhancement for 2017 Grand Design Momentum 376th Toy Hauler
- Article: Slipper Spring Trailer Suspension System Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Video: etrailer Trailer Suspension 115052 Review
- Video: Redline Trailer Suspension 18-11GALV Review