Review of Dexter Trailer Leaf Spring Suspension - Rear Hanger - 30-61-1 Video

Customers compare 30-61-1 to these similar products

Dexter Single-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 5-1/4" Front

(4)

$212.21

Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole

(130)

$9.62

Front Hanger for 3" Wide Slipper Springs - 6-1/4" Tall - 1" Bolt Hole

(4)

$67.07

Dexter Single-Axle Trailer Hanger Kit for 3" Slipper Springs - 6-1/4" Front

(3)

$345.48

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers

(58)

$172.38

Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 48-1/2" Axle Spacing

(8)

$593.20

Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole

(30)

$15.78

Dexter Equalizer for 3" Wide Slipper Springs - 24-3/4" Long - 1-1/8" Center Hole

(11)

$255.37

Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K

(205)

$283.66

Rear Hanger for 2-1/2" Slipper Springs

(8)

$41.55

Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs - 42-1/4" Axle Spacing

(1)

$520.71

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

(129)

$29.54

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter

(135)

$30.78

Rubber Bushing with Steel Sleeve - 1-1/8" ID, 2-1/8" OD - 3-3/4" Long - Qty 1

(5)

$18.83

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

(5)

$212.47

Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated

(21)

$59.78

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear

(128)

$48.70

Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole

(95)

$6.92

Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole

(80)

$29.19

Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle

(41)

$174.73

Products Featured in this Video

Dexter Trailer Leaf Spring Suspension - Rear Hanger - 30-61-1 Review

Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this four and a half inch tall rear weld on hangar for two and a half inch wide slipper spring. Now, this rear hangar is designed to work with the trailer suspension systems that have two and a half inch wide slipper springs. This is often used as a rear hanger for the Dexter 10,000 pound general duty axles. This does… see more >

Info for this part was:

Installed by:

Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.