Base Plate and Quick Disconnect for the Duncan Towmaster II Tow Bar On a 2000 Jeep Wrangler Sahara

Question

Question:

What baseplace do I use to attach to my 2000 Jeep Wrangler Sahara? Also need quickconnect brackets to attach above tow bar to baseplate.

asked by: Wesley H

0

Expert Reply:

The base plate kit for your 2000 Jeep Wrangler Sahara will depend on the style of front bumper you have on your Jeep. If you have the double tube bumper you will need the Roadmaster EX4 Base Plate Kit, item # RM-521424-4. If you have the single tube bumper you will need the Roadmaster XL Base Plate Kit, item # 1420-1 and if you have the U-Channel bumper you will need the Roadmaster Standard Base Plate Kit, item # 1417-1.

To have quick disconnects to use with the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter, item # RM-038, you will need the Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201.

expert reply by: Robert G

0

Answer 1

The method of connection will depend on which manufacturers tow bar you are using. Some vehicles use a base plate kit that features removable draw bars, which might be what you have (see photo). The type of base plate for the 1998 CRV uses standard…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 11

I can definitely see how the specs can be a bit confusing. That said, I can say with 100% certainty that this will still work perfectly for you. The 42 pound per bike capacity you are seeing for the Kuat Piston Pro X #KU98VR is ONLY when installed…

view full answer...

Answer 12

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...