Using the Hopkins Tailgate EasyLift with the DeeZee Tailgate Assist

Question

Question:

2006 Ram 3500 looks like it would rub paint off, will it ? I now have a Dee Zee lowering strut installed, works great on lowering no help on lift, will they work together?

asked by: Randy

0

Expert Reply:

I spoke with my contact at DeeZee and he said that you shouldn't have a problem using the Hopkins EasyLift, # 74211, and the DeeZee Tailgate Assist, # DZ43300 at the same time on your 2006 Dodge Ram 3500 but since they have not been tested together, it is not a guarantee.

Although we have numerous satisfied customers that have not mentioned having any problems with their paint while using the Hopkins EasyLift, # 74211, you are still dealing with two metal components having contact with each other. Anytime there is metal to metal contact, there is a good chance that paint will rub off or chip.

expert reply by: Leah S

0

Answer 1

We do have a power tailgate lock kit that fits your 2015 Ford F-250 that has a crew cab and long bed with the Pace Edwards #311-LK370 but the #PAL8250 does not fit this configuration so would not work for you.

view full answer...

Answer 2

As shown in the attached video at about the 32 second mark, the template is used to show where to drill the hole in the truck tailgate post and then in the tailgate itself. You want to make sure you mark and drill the holes that are designed for your…

view full answer...

Answer 3

Yes, the EasyLift will work on almost all full size Ford pickups made from 1984 on, including duallys. However, it will not work on a Ford Super Crew Cab pickup.

view full answer...

Answer 4

We do indeed offer a tailgate assist for a 2015 Ford F250 Super Duty, part #DZ43203. This is compatible with tailgates equipped with the slide out step. If you click the provided link, you can see an install video. This particular assist takes much…

view full answer...

Answer 5

The DeeZee Tailgate Assist Custom Tailgate-Lowering System is not available for a 1997 Ford F-250 but I do have a very similar option for you in the Hopkins EasyLift Truck Bed Tailgate Lift Assist part #74211 (All Models Expect Step-Side). The…

view full answer...

Answer 6

For a 2011 Ford F250 you would want the DeeZee Tailgate Assist System #DZ43203. This product is confirmed to fit your vehicle, whereas the Hopkins Tailgate Assist #74211 you referenced would not work. I attached an install video for the #DZ43203 for…

view full answer...

Answer 7

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...