Gorilla-Lift Utility Trailer Tailgate Lift Assist Installation Video

What happens if you attach the quick link to one of the higher holes on the bracket that attaches to the ramp? That should get you more spring tension when the ramp is closer to being closed to help close it.

In order to determine if the Rack'em Double Barrel Trailer Tailgate Assist, #RA-27C, will work with your trailer, you will need to measure the height and length of the side rails. This unit will work on trailer side rails that are 10 to 15 inches…

Feel free to send me an email of your setup. But if you can mount the Rack'em Double Barrel Trailer Tailgate Assist #RA-27C 10 to 15 inches higher than the floor the ramp is attached to this should work well for you since it has a 200 lb…

I saw the review you were referencing with regard to the Rack'Em Double Barrel Utility Trailer Tailgate Lift Assist #RA-27C and what they said wasn't that it would not work but that the chain is hindered by the latch. It is possible you may…

There are a couple of things you will want to check with the installation of the Double Barrel Trailer Tailgate Assist, part #RA-27C. The first thing you will want to check is to make certain the trailer gate does go all the way to the floor with the…

The length of the spring or internal mechanism does not really matter. What matters is the measurement from the floor of the trailer up to the top of the mounting bracket for tailgate assist #RA-27C. The top of the bracket that attaches to the…

Appreciate the photo, and you look to have an equalizer that is 7-3/4 inches from center to center, and for an equalizer upgrade I recommend the E-Z Flex: - E-Z Flex Equalizers #K71-655-00 The E-Z Flex #K71-655-00 will do exactly what you are looking…

The Solera Manual Pull Style to Power Awning Conversion Kit, Black #LC329251 will simply require changing the heads on your awning frame and then wiring the unit. I've attached the photo from the installation manual that specifies how to wire the…

That's a really good question and I do apologize for confusion on that. But the reason instructions aren't included with the Conventional ramp door spring part #362SA4 is because they aren't intended for the DIYer to install. It is…

Normally the trailer ramp springs like the #362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.

The 225/75-15 tires you are wanting to install are only just slightly larger than the 205/75-15 tires you have now so they can be swapped out rather easily. They will work just fine with the wheels you have now as well so you shouldn't have any…

The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…