Truck Trolley Truck Bed Slide Review - 2020 Ford F-150 Video

Truck Trolley test fit the part #TR87VR on the 2023 Ford F-150 and found that it does fit the 5-1/2 foot and 6-1/2 foot beds so it would for sure fit yours. We also had the chance to test fit it on a 2020 model and found that it fit and worked…

The Truck Trolley Sliding Truck Bed Tray #TR87VR actually just installs using straps, which is why it has a 300 lb weight rating as opposed to 1,000 + lbs like we see with some of the sliding cargo trays that bolt to the truck bed. The installation…

Yes, the Truck Trolley Sliding Truck Bed Tray #TR87VR does slide out of your truck bed. It has wheels built into the bottom of the tray. This is capable of supporting up to 300lbs and will extend 12-18" beyond your tail gate.

Not all aluminum trailer frames are strong enough for use with a steel weight distribution (WD) system. It is possible that the stronger steel WD components could put too much stress on the frame. If your trailer has an aluminum frame…

The Rhino Rack Heavy Duty 2500 Roof Rack Systems will work with the Rhino-Rack Nautic Stack Kayak Carrier part #RRS520 per Rhino Rack so you will be good to go.

Per the instructions at step 12 for the Rhino-Rack RT-Style Roof Rack Tracks, it states that you should use the pneumatic or concertina style rivet gun because the rivets have to be firmly seated in the tracks. Using a normal hand rivet gun may not…

We do not carry a part that adapts Rhino-Rack Nautic Stack Kayak Carrier part #RRS520 to fit the Yakima round bars. It fits the Yakima Whispbar (aero) and the Yakima Heavy Duty bars (square) but not the round. I recommend the Thule Stacker part…

The new mounting brackets that come with the 2.0 are designed to wrap around a crossbar so placing them around the Rooftop Tent Mounting Brackets for Rhino-Rack Pioneer Platform Racks #RR57RH wouldn't really give you a secure fit. You would need…

Great news! There is a tailgate assist available for the 1993 Chevy C1500. Hopkins Tailgate Lift Assist part #74211 is designed for the Chevy C1500 and allows you to easily lift and lower your tailgate. The Tailgate Assist is designed with a torsion…

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

I have a tailgate lift solution I can provide for both of your trucks, but the part #DZ43100 that you referenced is not listed as a fit for either truck. Instead you would want the part #74211 as it has been confirmed as a fit the 1998 truck and…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…