Timbren Rear Suspension Kit that Fits 2006 Dodge Dakota

Question

Question:

i am looking for bumpstops for my 2006 dodge dakota 4x4, i pull a 2000 pound travel trailer and with what i carry in the bed of the truck it sags alot. any help is appreciated, THANK YOU

asked by: Steve M

0

Expert Reply:

Hey Steve, what you would want is the Timbren kit part # TDDR05 that fits your 2006 Dodge Dakota. This will give your truck additional rear suspension support so that it doesn't sag when towing your travel trailer.

expert reply by: Jameson C

0

Steve

3/22/2024

Thank you very much Jameson, I really appreciate it!!

Reply

Answer 1

The Hopkins Plug-in Simple Brake Wiring Adapter - Dodge, part #HM47755 is designed to be used on vehicles that have a factory tow-package. Since your 2005 Dodge Dakota does not have the tow package, you will need to connect each of the wires…

view full answer...

Answer 2

For a 2006 Dodge Dakota that does not have the factory tow package you will need to hardwire in a trailer brake controller. The first thing you will need is a 4-Way trailer wiring harness, #118323. If the truck already has a 4-Way you will not need…

view full answer...

Answer 3

You could indeed use both at the same time if you cared to, as they would fit but it isn't necessary. I'd recommend going with the Timbren #TGMRCK15S only, as that kit offers 8600 lbs of capacity which is plenty. This kit isn't compatible…

view full answer...

Answer 4

In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type. For the front of your truck you will want to use the TorkLift…

view full answer...

Answer 5

For your quad cab 2004 Dodge Dakota with 4 wheel drive and 4.7 liter V8 the towing capacity would be 6,100 lbs. The GCWR for your truck would be right at 10,500 lbs. This rating is the total weight of the truck and trailer combined.

view full answer...

Answer 6

The towing capacity of your 2004 Dodge Dakota is 3,400 to 4,650 lbs. If you were to install the Curt Class 3 Trailer Hitch Receiver #C13145 which has a Gross Trailer Weight of 5,000 lbs and a Tongue Weight of 500 lbs your Dakota would be the limiting…

view full answer...

Answer 7

Absolutely, I am here to help! The max carrying weight of a hitch is how much the hitch can pull if you were to just hook your trailer up to the hitch and not use a weight distribution system. The Gross Trailer Weight or GTW of this hitch is 5,000…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Steve, what you would want is the Timbren kit part #TDDR05 that fits your 2006 Dodge Dakota. This will give your truck additional rear suspension support so that it doesn't sag when towing your travel trailer.

view full answer...