Brake Controller Components Needed For A 2023 Subaru Forester Wilderness

Question

Question:

Hello, Im looking for the needed parts to install a wireless brake controller on my 2023 Subaru Forester Wilderness. The camper I need to tow is a 2020 Aliner Ranger 10. Could you confirm whether or not ETBC7L with C51180 will work? Thanks! Misty

asked by: Misty H

0

Expert Reply:

Hi Misty,

The # ETBC7L along with the Curt Echo Wireless Brake Controller # C51180 would be a compatible option for your 2023 Subaru Forester, but you might need to install one other wire harness first. If you don't currently have a 4-pole trailer wire harness then you'll first need to install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. This comes with plug-in connectors for a fast and easy installation.

Once complete you can connect the 4-pole connector to the one on the # ETBC7L and then splice in the other wires in the following manner:

Black - run to the battery with included in-line circuit breaker
White - ground to frame using included self-tapping screw and ring terminal
Blue/Yellow - cap these off with some electrical tape since these won't be used.

I recommend also picking up a no-drill bracket # 18136 to make mounting the # ETBC7L on the hitch much easier.

Once complete you can plug-in the Echo # C51180 and begin the syncing process with the OneControl app on your smartphone.

expert reply by: Kevin C

0

Answer 1

Thanks for passing that on! I attached the install video for the #C56040 on the 23 Outback you mentioned as well.

view full answer...

Answer 2

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 3

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 4

Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the…

view full answer...

Answer 5

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 6

If the OEM brake controller on your 2014 Ram pickup is operating properly then you don't "need" an aftermarket controller. With that being said, the OEM controllers aren't as reliable as aftermarket options so it may not be a bad…

view full answer...

Answer 7

The replacement lens that you are looking for is the (discontinued) Clearance Light Replacement Lens #59 Red 34-59-010 from Bargman which has 4" L x 2" W x 5/8" H dimensions just like you have. Attached is a review video for you to…

view full answer...

Answer 8

I pulled the Dexter Hub Assembly, #AH15450ECOMP, from the warehouse and made a simple diagram showing the outer dimensions for you to check out, see photo. This hub comes with the bearings, seal, grease cap and lug bolts. This hub fits spindle…

view full answer...

Answer 9

Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk…

view full answer...

Answer 10

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 11

First you should reach out to Air Lift as the Springs #AL57132 do have a Lifetime warranty. They are very good with their warranty department and may be able to help you find a local shop who has the spring in stock to help you get back on the road…

view full answer...

Answer 12

With the height of your truck camper at 7-1/2' tall I recommend using a Inno Kayak Lifter Load Assist #INA453. This will clamp onto your crossbars up to 3-1/2" wide and 1-1/8" tall and fits a crossbar spread of 27-39". Since it is…

view full answer...