Does OEM Brake Controller Need to be Replaced with Aftermarket Controller on a 2014 Ram Pickup

Question

Question:

If we have an integrated brake control on our 2014 Dodge Ram, is it necessary for the camper dealer to charge us 200 for a braking system or can we use the brake control built in on our truck as the means to brake the camper were towing?

asked by: Wayne S

0

Expert Reply:

If the OEM brake controller on your 2014 Ram pickup is operating properly then you don't "need" an aftermarket controller.

With that being said, the OEM controllers aren't as reliable as aftermarket options so it may not be a bad idea. I am not sure how much they charge for labor, but I can say that swapping out the OEM brake controller for an aftermarket option really isn't hard at all. Currently the best controller that we offer is the Redarc Tow-Pro Elite # RED63RR due to the versatility. This connects to your OEM wiring with the adapter # 3023-P and is right around the price mark that you mentioned. I can guarantee that the controller they install won't be as nice as this one.

If you are looking to save a few bucks then I recommend going with the Prodigy P3 # 90195 which installs with the adapter # 3023-P. This is one of the only controllers out there that uses an LCD screen so you can see exactly what is going on without having to read codes.

I have attached some videos for you to check out on the controllers if you would rather go this route as I am not sure the quality of the controller that they will be installing.

expert reply by: Jon G

0

Answer 1

The replacement lens that you are looking for is the (discontinued) Clearance Light Replacement Lens #59 Red 34-59-010 from Bargman which has 4" L x 2" W x 5/8" H dimensions just like you have. Attached is a review video…

view full answer...

Answer 2

A local Dodge dealer will have to reprogram the truck to disconnect the factory brake controller. That will allow you to install an aftermarket brake controller like the Tekonsha Prodigy P3, #90195, which is an excellent brake controller by the…

view full answer...

Answer 3

Hey Stephen, All Curt 5th wheel trailer hitches, including the #C16545-16017, are manufactured in China. I've attached a link to one of our help articles below that lists where manufacturers produce their hitches. If you're wanting…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Does OEM Brake Controller Need to be Replaced with Aftermarket Controller on a 2014 Ram Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching