Replacement Leaf Spring Solution for 2021 Grand Design Solitude

Question

Question:

Hello. I have a 2021 Grand Design Solitude. The Dexter axles are # 9625074. I am looking for replacement leaf springs. Do you have a direct replacement?

asked by: John D

0

Expert Reply:

The Dexter axles you have are 7k rated based on the part number you mentioned so the etrailer leaf springs part # e64SR that you referenced would be the correct part number as long as your current springs are right at 25 inches unloaded. If you have a different length we wouldn't be able to help though as this is our only option John.

expert reply by: Jameson C

0

Answer 1

In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…

view full answer...

Answer 2

Yes, the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles #e64SR will work as a replacement. The leaf springs on your 2012 Redwood 36FL have probably elongated as they wear out over time. Regardless, the 2/8" difference is negligible…

view full answer...

Answer 3

Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs…

view full answer...

Answer 4

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 5

Measure the shackle strap lengths from hole center to hole center and you'll know which kit to get. If the distance is 2-1/4 inches long you'd want the part #MR86ZR or if they are instead 3-1/8 inches you'd want the part…

view full answer...

Answer 6

I recommend going with one of the 2-1/4" shackle kits. You will need either the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" #MR86ZR if you have standard hangers or the MORryde Suspension Upgrade Kit for Triple…

view full answer...

Answer 7

Yes, the 2-1/4" Long MORryde Suspension Upgrade Kit item #MR86ZR will lower your trailer's frame closer to the ground. The only effect it will have is to ever so slightly reduce your suspensions travel. The MORryde Suspension Upgrade…

view full answer...

Answer 8

For your 2018 Fuzion 429 triple axle Toy Hauler the MORryde Suspension Upgrade Kit for Triple Axle Trailers #MR86ZR would be what you'd want. This comes with wet bolts like you are wanting as well as the matching heavy duty shackle straps and…

view full answer...

Answer 9

In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part #MR86ZR or if you have 3-1/8" long shackle straps you can use…

view full answer...

Answer 10

The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler #AD69ZR that you referenced was designed to fit standard fifth wheel camper height and widths for a 37 foot long camper which is typically around 18-20 foot tall and 100 inches…

view full answer...

Answer 11

The Adco SFS AquaShed RV Cover for 5th Wheel Toy Hauler - Up to 37' Long - Gray Item #290-52256 is designed for the rain, snow, and sun of your Kansas City based climate. If you look at the attached map you'll see that it is listed as being…

view full answer...

Answer 12

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Replacement Leaf Spring Solution for 2021 Grand Design Solitude

Product Page this Question was Asked From

Continue Researching