How To Choose Correct MORryde Shackle Upgrade Kit

Question

Question:

I have a keystone raptor 412 toy hauler three axle is this the correct shackle kit morryde UO12-023 21/4 shackles

asked by: Vernon H

0

Expert Reply:

In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part # MR86ZR or if you have 3-1/8" long shackle straps you can use part # MR26ZR. These are the two most popular sizes.

expert reply by: Conner L

0

Answer 1

If your wheelbase is close to 35 inches like you mentioned it will work great with the MORryde Rubber Equalizers for Triple Axle Trailers #MR39ZR. This is a cushioned setup that will make a big difference the ride quality of your 2018 Grand Design…

view full answer...

Answer 2

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 3

The MORryde Suspension Upgrade Kit #MR26ZR is designed to be used with the MORryde Rubber Equalizers for Triple Axle Trailers #MR39ZR. This equalizer kit only requires 6 sets of shackles as it removes one set of the shackles and allows the leaf…

view full answer...

Answer 4

Since you mentioned that your Keystone Raptor 412 has shackles that are 2-1/4 inches long the shackle kit part #MR38ZR that you referenced is the correct fit and would work great as an upgraded and heavier duty shackle. The price is available at the…

view full answer...

Answer 5

The MORryde Suspension Upgrade Kit #MR48ZR is designed for trailers with Correct Track suspension and 3-1/8" shackle bolt center to shackle bolt center. You will need to confirm that your 2008 Jayco triple axle fifth wheel has the Correct Track…

view full answer...

Answer 6

Great choice in selecting the Equa-Flex Cushioned Equalizers #LC279689. Yes this identifies the wet bolts and shackles as being sold separately, you will need to measure the current shackles so as to match as close as possible. A slight variation is…

view full answer...

Answer 7

There's no inflation/deflation maintenance schedule for the air bags in the Trailair Flex Air pin boxes like the #LC369535 that you referenced. Whatever PSI rating your towing setup requires can be left in at all times. Air bags are not known for…

view full answer...

Answer 8

Air pressure for the TrailAir pin boxes such as #LC328484 can range from 20 to 120 psi. There isn't a specific amount of pressure you have to use. Instead it is recommended to inflate the air bag to maintain a level ride height but do not inflate…

view full answer...

Answer 9

I attached the installation instructions for the Lippert Trailair Pin Box part #LC179879 that you referenced to this page.

view full answer...

Answer 10

Yes, the Andersen Ultimate 5th Wheel Hitches like our rail-mount #AM3200 can be mounted in either direction so that the offset ball is more towards the tailgate or towards the cab. If this better suits your application when trying to maneuver the…

view full answer...

Answer 11

For upgraded shackles on your 2020 Heartland Cyclone 4007 5th wheel I recommend one of our suspension upgrade kits. In order to select the correct kit you will need to know the length of your current shackles. If you have 2-1/4" shackle straps…

view full answer...

Answer 12

Hey Wayne, The correct way to measure shackle straps would be from center to center of the eyelets. If your shackle straps are worn out and the holes are oblong then you'll want to remove the bolts and you'll have to guess a bit where the…

view full answer...

How To Choose Correct MORryde Shackle Upgrade Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching