Recommended Hitch for a 2024 Subaru Crosstrek Wilderness

Question

Question:

Does y'alls etrailer hitch fit a 2024 Subaru Crosstrek Wilderness?

asked by: Jess

0

Expert Reply:

It sure does! The etrailer Hitch item # e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.

I really like the etrailer hitch item # e98912 because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground clearance.

f you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534.

I have linked a couple of installation videos below so you can see how to get these parts set up.

expert reply by: Jerred H

0

Answer 1

Hey Marc-Andre, Yes the EcoHitch part #306-X7365 that you referenced is a confirmed fit for your 2024 Subaru Crosstrek Wilderness.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

Yes, the etrailer hitch part #e98912 that you referenced fits the Wilderness versions of the 2024 Subaru Crosstrek

view full answer...

Answer 6

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 7

Yes, it does! The Draw-Tite Hitch item #76209 has been confirmed to fit all models of the 2024 Subaru Crosstrek including the Wilderness. This hitch is custom fit and bolts to your Subaru with included hardware. If your Subaru is not a hybrid, I…

view full answer...

Answer 8

There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…

view full answer...

Answer 9

Yes, it does. We have had a customer install the etrailer Hitch item #e98912 on their 2024 Subaru Crosstrek with no issues. This hitch is custom fit and bolts to your Crosstrek with included hardware. It does not fit the Hybrid models. Besides being…

view full answer...

Answer 10

Not only do the Curt item #C13382 and the etrailer item #e98912 hitches have the same measurements they are identical with the exception of the finish. Curt manufacturers our etrailer branded hitches to the same specifications as their own. Both have…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

You could use a step drill bit in the size of 7/8 inch to 1-1/8 inch which appears to be the size our installer used when installing the etrailer hitch part #e98912 in the install video link I attached.

view full answer...