Recommended Hitch for a 2024 Chevrolet Trailblazer

Question

Question:

Can you recommend a hitch for a 2024 Chevrolet Trailblazer?

asked by: Ruth

0

Expert Reply:

I would be happy to! To add a hitch to a 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item # DT55GR. This hitch is custom fit and bolts to your Trailblazer with included hardware.

I recommended the Draw-Tite Hitch item # DT55GR because of the way it installs. The main crosstube mounts behind your rear bumper cover leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance.

If you are planning on towing you will also need a wiring harness item # TK26VR if you have LED lights or item # TK39FR if you have incandescent lights and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

Yes, the Curt Trailer Hitch Receiver #C93VV will fit your 2024 Chevy Trailblazer LT as well!

view full answer...

Answer 2

Yes, it does! The Curt Hitch item #C93VV has been confirmed to fit the 2024 Chevrolet Trailblazer. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 2,000 lbs towing…

view full answer...

Answer 3

Due to overall brand reliability and quality, easily the best trailer hitch - and the one I recommend - for your 2024 Chevy Trailblazer is the Curt Trailer Hitch #C94UR.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...