Dimensions of Torflex Lift Kit # K71-723-01

Question

Question:

Can you tell me the over-all dimensions. Width is the one I am most concerned about.

asked by: Eric

0

Expert Reply:

I attached a picture that shows the dimensions of the Dexter lift kits # K71-723-01.

expert reply by: Jameson C

0

Lift kit dimensions
(click to enlarge)

Steven

2/25/2024

What is the depth from the open side to the back side on this?

Reply

Jameson C.

2/26/2024

@Steven The left to right width of the lift kit is 2-5/8 inch just like the height.

Reply

Steven

2/27/2024

@JamesonC is there one of these lift kits that is 2inches wide?

Reply

Jameson C.

2/28/2024

@Steven No there is not.

Reply

Answer 1

The Torflex lift kit part #K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

view full answer...

Answer 2

My contact at Dexter confirmed that the Torflex Lift Kit #K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the…

view full answer...

Answer 3

When you lift a trailer you potentially change the suspension geometry which might affect handling characteristics. So based on that it sounds like Lance would want to void the warranty of the camper. It would be like installing a lift kit on a truck…

view full answer...

Answer 4

The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01 is compatible with No. 10 Torflex axles with 2,300 to 4,000 lb capacities. The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 is for No. 9 Torflex axles with a 2,000 lb…

view full answer...

Answer 5

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Answer 6

I have a great alternative for you. I reached out to my tech at Dexter Axle with your provided serial number (thank you!). He confirmed that the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 is not compatible with the specs on your…

view full answer...

Answer 7

In order to choose the correct Torflex Lift Kit for your 2015 Retro Riverside Trailer, you will need to determine the type of axle that it has. We have a couple of single axle lift kits currently available from Torflex. If you have a #9 Torflex axle…

view full answer...

Answer 8

If the distance between the bolt hole centers on your Torflex axle is 7-3/4 inches then you have the #9 Torflex axle and the lift kit part #K71-723-01 would fit and work well. If you have a different dimension there let me know and I'll see what…

view full answer...

Answer 9

Since your Jayco 1406 has 1,800 lb Torflex axles the lift kit you'd need is the #K71-723-01 which will give you a lift of 2-5/8 inches. This is a single axle kit so you'd need to order a quantity of two since you have a tandem axle trailer.

view full answer...

Answer 10

Since your 1998 Starcraft has 1,800 lb Torflex axles the lift kit you'd need is the #K71-723-01 which will give you a lift of 2-5/8 inches.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Dimensions of Torflex Lift Kit # K71-723-01

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching