Trailer Hitch that Fits 2018 Tesla Model S

Question

Question:

Would this trailer hitch for the model X fit on a model S do the whole patterns lineup the same ?

asked by: Richard W

0

Expert Reply:

We have a hitch that fits your 2018 Tesla Model S with the EcoHitch part # 306-X7201 but the hitch you referenced does not fit your vehicle.

expert reply by: Jameson C

0

Answer 1

Yes, we do have installers in your area. You will want to go to the product page for the Draw-Tite Max-Frame Trailer Hitch Receiver item #76143, you were looking at, and click on the link below the picture that says "Locate installers near…

view full answer...

Answer 2

The Draw-Tite #76143 that fits your 2016 Tesla Model X is not designed to be installed with the factory hitch. To install the Draw-Tite you would need to first have your factory hitch removed, and then the Draw-Tite installed; this hitch has been…

view full answer...

Answer 3

The Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item #119250KIT for your 2016 Tesla Model X does not require cutting or splicing wires but it isn't plug and play. It uses…

view full answer...

Answer 4

I checked with our vendors and as of 04/27 the only hitch available for the 2023 Tesla Model X is the Draw-Tite item #76143. This hitch is custom fit and bolts to your Tesla with included hardware. It does not have a removable receiver so you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 9

The EcoHitch #EH84GR is indeed a fit for the 2021 Tesla Model 3, it'll work great for you. When the removable receiver is detached, the hole in the underside of the bumper fascia can indeed be covered using part #306-XA2002. I've provided a…

view full answer...

Answer 10

The dimensions of the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2002 that you referenced is 8-1/2" long by 5-1/16" wide by 1/8" thick. Your hole being initially cut with a 4 inch hole saw would…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...