Recommended Weight Distribution System for a Trailer w/ a 485 lbs Tongue Weight

Question

Question:

I have a trailer that has gross weight of 5000# and a tongue weight of 485#. Which weight distribution hitches would you recommend?

asked by: Marshall H

0

Expert Reply:

Since your trailer's tongue weight is 485 lbs, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA92-00-0600. This system works with tongue weights that range from 250 lbs - 600 lbs so it'll be perfect for your trailer.

The Fastway e2 item # FA92-00-0600 has built in sway control that will keep your trailer in line with your tow vehicle when you're going down the highway and get passed by a semi or make a sudden move. This system includes a 2" shank that can be adjusted 7-1/2" to make sure your trailer is level with your vehicle.

I have linked a review video below so you can see how to get this system set up.

This system does not include a hitch ball. Depending on your coupler size you will either need a 2" Hitch Ball item # A-90 or a 2-5/16" hitch ball item # C40030.

expert reply by: Jerred H

0

Answer 1

It sounds like your system may be overloaded. The first thing I would recommend is finding your actual tongue weight. Your Curt #C79JR (17600) has a tongue weight range of 800-1,000 lbs. If your tongue weight is around 1,000 lbs you're already at…

view full answer...

Answer 2

Due to the front section of your trailer A-frame you will need to use a Pole-Tongue Adapter #EQ95-01-5950 that needs to be mounted between 27-32" back from the hitch ball center. You will need to check and see if this will fit with your propane…

view full answer...

Answer 3

When picking out a weight distribution system you want to go with a system that has a tongue weight range that encompasses the loaded tongue weight of the trailer. In other words you want your loaded tongue weight to fall pretty close to right in the…

view full answer...

Answer 4

The Weigh Safe Adjustable Hitch Ball with Built in Scale #WSUN-1 will not work with the Fastway e2 Weight Distribution System #FA92-00-0600 because of the clearance issues, like you said, and also the shank is only 1 inch. The Fastway requires a…

view full answer...

Answer 5

The Buyers Products Trailer Tongue Toolbox part #3371701680 does not come with mounting hardware. It can be secured in a number of different ways, most drill directly though the bottom of the box and into the frame. If you can find a way to mount the…

view full answer...

Answer 6

I am going to recommend the 600 Trunnion Fastway e2 Weight Distribution #FA92-00-0600 over the 450 Trunnion #FA92-00-0450 and 600 Round Bar #FA94-00-0600 for your 2015 Forest River RPOD 179. The 600 Trunnion Fastway e2 Weight Distribution…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...