Recommended Hitch for a 2024 Ford Edge

Question

Question:

Do you have a hitch that fits a 2024 Ford Edge?

asked by: Rocky

0

Expert Reply:

Yes, we do! To add a hitch to your 2024 Ford Edge, I recommend the etrailer item # e36RR. This hitch is custom fit and bolts to your Ford with included hardware. This hitch fits all models of the 2024 Edge including the Titanium, SEL, and SE.

I really like this hitch because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver exposed. This not only helps with ground clearance but it looks better. On top of that the flat matte finish will blend in better beneath your Ford's trim then the glossy finishes on the Curt item # C78KR or Draw-Tites item # 75234.

The etrailer Hitch item # e36RR is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight.

I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed.

If you are planning on towing you will also need a wiring harness item # C73FR for the Titanium model or item # C89FR for the SE or SEL models and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Ford Edge
(click to enlarge)

Answer 1

I checked the owners manual for your 2014 Ford Edge and it looks like as long as your vehicle has one of the V6 engines it can be flat towed with all four wheels on the ground. If you have a 4 cylinder you would need to use a tow dolly. To flat tow…

view full answer...

Answer 2

The heat shield might need to be removed on your 2020 Ford Edge when installing the Draw-Tite Trailer Hitch #75234, depending on your specific model. The installation instructions at the end of Step 1 state that on Sport and MKX AWD models, the heat…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Recommended Hitch for a 2024 Ford Edge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching