Recommended Hitch for a 2024 Mazda CX-90

Question

Question:

Do you have a hitch for a 2024 Mazda CX-90?

asked by: Micah

0

Expert Reply:

Yes, we do. To add a hitch to your 2024 Mazda CX-90, I recommend the Curt Trailer Hitch item # C25FV. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight.

I really like this hitch because the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver exposed which not only looks better but helps with ground clearance.

If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which…

view full answer...

Answer 2

It is, yes. It can be hard to tell for sure, so I have added a photo for you showing the underside of a 2024 Mazda CX-90 with the Curt Trailer Hitch Receiver #C25FV. As you can see by that photo, the crosstube is concealed and hidden away, so only…

view full answer...

Answer 3

What you're looking for is the Curt #C24ZV. This wiring harness plugs into the OEM vehicle socket in the rear cargo area. Once installed, you will have a 4-way to power your trailer's signal lights. In addition to the hitch #C25FV and…

view full answer...

Answer 4

There is no cutting required to install the Curt Hitch item #C25FV on your 2024 Mazda CX-90. There is a small panel beneath your bumper cover that you will remove and not reinstall that will give you clearance for the 2" receiver. If you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...