TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1505 reviews)
Price: $387.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1505)
- Q & A (0)
- Photos
- Used (1)
2019 Chevrolet Silverado 3500 - TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C3216 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLC3216
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLC3216
Average Customer Rating: 4.7 out of 5 stars (1504 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Keith03/07/2024
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
by: Scott 02/12/2023
I have purchased many TorkLift products from eTrailer, all of which have performed as expected. The installation instructions are thorough and easy to follow. eTrailer product support and customer service is second to none. Thank you for your continued reliability.
by: Steve - Air20606/07/2015
The application took dexterity in fishing bolts/spacers and washers through the frame. That is the price to pay for a drill-less install.
Harry and Harriet Homeowner can install this in their garage without a lift.
The final result is excellent - inconspicuous and strong on our 2015 GMC 3500HD
by: Jeffrey 10/01/2022
Fit perfect and tie down a heavy truck camper.
by: Bart09/05/2019
Could not be happier with the quick service I received from etrailer and outstanding product I purchased. The install was a breeze with the easy to follow instructions and I am now able to stay wherever it is I am playing! Thanks for the great prices and good service ??
by: Noah 06/02/2023
Installed easy
by: Robert04/07/2018
Thanks Katherine everything was still in the box just installed the torklift hitch it fit perfectly thank you for your help with my order awesome customer service.
by: Willie 05/12/2023
Love them and easy to install
by: Patrick02/27/2021
The frame brackets have been working great although the tiedowns took a turn after eight months
by: Eddie12/12/2021
Everything that I have purchased from etrailer came in on time went together easily no problems at all
by: Dean B05/01/2020
Fit well, long term finish and quality leaves plenty to be desired, after 5k miles in a year and being stored indoors finish is peeling and rusty on the edges
by: Dan D06/02/2020
They work great !!! Very satisfied with the quality of the products and your customer service.
by: Jeremy06/01/2016
works as described and love it. keeps a clean look during and when not in use
by: Zachery10/26/2020
So easy to install, look great on the t ruck
by: Larry03/12/2022
Awesome customer service !
by: Stan11/03/2021
The product is well made and easy to in stall
by: Darrell 12/18/2020
Great people to buy from, customer service can't be beat!!!
by: 07/08/2023
by: John03/07/2022
by: Billy 09/12/2022
by: Brad 01/11/2023
by: Jim 01/03/2023
by: Eric 03/03/2021
by: Wesley 08/16/2022
by: Peter 05/15/2021
25
1503
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Options Available for a 2018 Silverado 2500 Regular Cab With an 8 Foot BedAs camper tie downs are extremely specific as to what they fit, there are a couple other things you need to verify to make sure they are correct. First, the HappiJac Truck-Mounted Camper Tie-Downs # LC350763-182971 will fit all variations of the 2018 Silverado 2500 as long as a TorkLift hitch is not used. This will install with the front mounts mostly inside the bed and the rear mounts on the outside of the bumper. The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel...
view full answer... - Tork Lift Camper Tie Downs for a 2016 Chevy Silverado 3500 with Single Rear WheelsTo determine the correct camper tie downs for your 2016 Chevy Silverado 3500 we need to know the bed length, cab style, and if the truck has a factory hitch, aftermarket hitch, Tork Lift hitch, or no hitch. All of the front options for models that have running boards are # TLC4204 and they are currently listed for Crew or Double Cabs and 8 foot beds; none for short beds. So if you have a Crew or Double Cab with an 8 foot bed then for the rear you can use # TLC3215 if you have a factory...
view full answer... - Recommendations for adding a Truck Camper on My 2015 Chevrolet Silverado 2500 HD Crew Cab 6 ft. bedI have a solution for Truck Camper's needs. The first thing you will need is the tie-down equipment. The front tie-downs that are custom fit for your 2015 Chevy Silverado 2500 are Tork-Lift # TLC2220. The rear custom kit depends on a few details: If you have a dual rear wheel with no running boards and a factory hitch installed: # TLC3217. If you have a single rear wheel no running boards and a factory hitch installed: # TLC3215. If you have no running boards and torklift hitch installed:...
view full answer... - Recommended TorkLift SuperHitch Trailer Hitch for 2015 GMC Sierra 2500HD The TorkLift SuperHitch Original Trailer Hitch Receiver # TLC1212 referenced in your question is confirmed to fit your 2015 GMC Sierra 2500HD as long as you have the 6-1/2 foot bed. This dual-receiver hitch is pre-drilled for the TorkLift camper tie-downs and works perfectly with the SuperTruss Extensions like the 48 inch # TLE1548 that you mentioned. I have attached the installation instructions for the hitch that you can take a look at as well. For the TorkLift custom frame-mounted...
view full answer... - Correct TorkLift Rear Camper Tie-Downs for 2018 GMC Sierra 3500 with SuperHitch InstalledWhen replacing the factory hitch on your 2018 GMC Sierra 3500 with the TorkLift SuperHitch # TLC1211 you will indeed need to also replace the rear TorkLift Camper Tie-Downs. I confirmed this with my contact at TorkLift. For your 2018 GMC Sierra 3500 Dually with the 8 foot bed the correct rear tie-downs to match the new SuperHitch is the part # TLC3216 or # TLC3216A for the aluminum version that will be resistant to corrosion. The front tie-downs do not need to be changed.
view full answer... - Recommended Trailer Tie Downs for a 2017 GMC Sierra with a TorkLift SuperHitch MagnumThe TorkLift Rear Tie Downs that will pair with the SuperHitch Magnum # TLC1211-30, will be the # TLC3216. This will fit a 2017 GMC Sierra 3500 in both a dually model or a model with a single rear wheel. but is specifically designed to be used with the Magnum hitch. For the front tie downs, you will need the Torklift # TLC2219, which are also the same for dually and single wheel models.
view full answer... - Torklift Camper Tie Downs that Fit 2022 Chevy Silverado 3500There is a big enough difference between a 2015 and 2022 GMC Sierra 3500 long bed that the Torklift tie down fits changed. So the # TL44FR and # TLC3221 are compatible with your new truck but the other part numbers you mentioned of # TLC2220 and # TLC3216 only fit the older truck.
view full answer... - How to Choose TorkLift Truck Camper Tie DownsThe specific TorkLift camper tie downs you'll want for your 2019 Chevy Silverado 2500HD will depend on the hitch you have any whether you have a step. Here are the possibilities and the parts for each regular cab setup. 8 Foot Bed - Regular Cab - without board or step underneath truck bed and with a factory installed hitch: Use # TLC2215 and # TLC3215 8 Foot Bed - Regular Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch: Use # TLC2215 and # TLR3500 8...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Test Fit:
Conner L
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Victoria B.
5/4/2020
To help extend the life of your tie-downs and prevent further rust, you can clean off the rust at the edges and cover any bare metal spots with a black, rust-inhibiting spray paint.