Does Installing the Curt Hitch C25FV on a 2024 Mazda CX-90 Require Cutting?

Question

Question:

I have a 2024 new Mazda cx90 I would like to put a hitch on it I have a 2” Kuat bicycle rack Do I have to cut anything on my bumper or does it fit right under it

asked by: Norman B

0

Expert Reply:

There is no cutting required to install the Curt Hitch item # C25FV on your 2024 Mazda CX-90. There is a small panel beneath your bumper cover that you will remove and not reinstall that will give you clearance for the 2" receiver. If you wanted to reinstall the panel you would then need to make some cuts in it so it would fit around the downtube of the hitch but this is not required.

I have linked the installation instructions below so you can see what I am talking about. It's covered in step 1.

expert reply by: Jerred H

0

Answer 1

It is, yes. It can be hard to tell for sure, so I have added a photo for you showing the underside of a 2024 Mazda CX-90 with the Curt Trailer Hitch Receiver #C25FV. As you can see by that photo, the crosstube is concealed and hidden away, so only…

view full answer...

Answer 2

It looks quite good, in my opinion; I have gone ahead and added a photo for you of a 2024 Mazda CX-90 so you can see what yours will look like after the installation of the Curt Trailer Hitch Receiver #C25FV. The #C25FV has a concealed crosstube so…

view full answer...

Answer 3

The best hitch for a 2024 Mazda CX-90 is going to be the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500…

view full answer...

Answer 4

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which…

view full answer...

Answer 5

John, the Curt Trailer Hitch Receiver #C25FV will fit all of the models of the 2024 Mazda CX-90, including the PHEV.

view full answer...

Answer 6

You're in luck because we do! To add a hitch to your 2024 Mazda CX-90, I recommend the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2". It has a 5,000 lbs…

view full answer...

Answer 7

Yes, the cure class 3 hitch #C25FV will indeed fit your 2024 Mazda CX-90 PHEV. I confirmed this directly with the manufacturer. The #C25FV will actually fit all models of the 2024 CX-90, including the PHEV.

view full answer...

Answer 8

The hitch and wiring combo you'll need to go with for your 2024 Mazda CX-90 comes from Curt and includes the following parts: - Trailer Hitch #C25FV - Wiring Harness #C59236 The trailer hitch doesn't require drilling, but you may need…

view full answer...

Answer 9

Since the Curt 4-way kit part #C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.

view full answer...

Answer 10

While we have not had a 2024 Mazda CX-90 PHEV in our shop with the hands free liftgate to test the exact function I can say most applications will not eliminate the use of the kick sensor. I installed our receiver on my Acura RDX which takes up a…

view full answer...

Answer 11

Yes, it does! The Curt Trailer Hitch item #C25FV is confirmed to fit the 2024 Mazda CX-90 PHEV. I checked with Curt and it actually fits all models of the 2024 CX-90. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing…

view full answer...

Answer 12

What you're looking for is the Curt #C24ZV. This wiring harness plugs into the OEM vehicle socket in the rear cargo area. Once installed, you will have a 4-way to power your trailer's signal lights. In addition to the hitch #C25FV and…

view full answer...