Recommended Wiring Harness for a 2024 Subaru Crosstrek

Question

Question:

Do you have a wiring harness with a 4-way connector for a 2024 Subaru Crosstrek?

asked by: Lloyd H

0

Expert Reply:

Yes, we do. It is the Curt T-Connector Vehicle Wiring Harness item # C56040. This custom fit T-connector plugs into your Subaru's wiring harness, which is located behind the interior trim panel in your rear cargo area. It will provide you with a 4-way connector.

expert reply by: Jerred H

0

Answer 1

The spacers that come with the etrailer hitch that fits your 2022 Subaru Crosstrek are designed to be used as a way to level the hitch as needed. So if using them causes your hitch to not sit level I would recommend removing them.

view full answer...

Answer 2

The correct fit for a trailer wiring harness that fits a 2024 Subaru Crosstrek (except for the hybrid models), what you need is the following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56040 I verified directly…

view full answer...

Answer 3

Yes, the etrailer hitch part #e98912 that you referenced fits the Wilderness versions of the 2024 Subaru Crosstrek

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The etrailer Trailer Hitch Receiver #e98912 weighs just 32lbs. This weight includes the mounting hardware.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...