What is the Difference Between the HTP1260BK and the HTP60BK Horse Trailer Side Pads?

Question

Question:

What is the difference between this HTP1260BK and the HTP60BK pads other than the price difference?

asked by: David H

0

Expert Reply:

They are different in width. Aside from that and price everything else is the same.

The Horse Trailer Side Pad item # HTP1260BK measures 60" long x 12" wide x 2" thick.

The Horse Trailer Side Pad item # HTP60BK measures 60" long x 9" wide x 2" thick.

expert reply by: Jerred H

0

Answer 1

We don't offer replacement horse trailer side pads in custom sizes, but for a larger size than the part #HTP40BK you would want the part #HTP60BK as this one is 60 inches long instead of 40 inches like the #HTP40BK.

view full answer...

Answer 2

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I…

view full answer...

Answer 3

For screws to attach the part #HTP24BK to your horse trailer we recommend the part #PS-8. These screws are 3/4 of an inch long so I would go with a plywood thickness of at least 1/2 of an inch.

view full answer...

Answer 4

In order to install the the Horse Trailer Side Pad - 60" #HTP1260BK you just need to screw them in. What you'll need are the Trailer Horse Pad Screw #PS-8 and attach them to the sides of the pad.

view full answer...

Answer 5

The PS-8 screws should work very well going into either material you mentioned. The threads are coarse enough that they'll get good hold on the aluminum or the rubber. For best results, you'll want to ensure that as many screws as possible go…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

What is the Difference Between the HTP1260BK and the HTP60BK Horse Trailer Side Pads?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching