Larger Horse Trailer Side Pad Recommendation than part # HTP40BK

Question

Question:

any custom orders....need bigger width.

asked by: Steve

0

Expert Reply:

We don't offer replacement horse trailer side pads in custom sizes, but for a larger size than the part # HTP40BK you would want the part # HTP60BK as this one is 60 inches long instead of 40 inches like the # HTP40BK.

expert reply by: Jameson C

0

Answer 1

They are different in width. Aside from that and price everything else is the same. The Horse Trailer Side Pad item #HTP1260BK measures 60" long x 12" wide x 2" thick. The Horse Trailer Side Pad item #HTP60BK measures 60" long x…

view full answer...

Answer 2

Are the holes you are referring to threaded? If so then you could drill a 1/4" hole into one of our pads (see below) and then use a bolt to attach them to the wall. If the holes are not threaded then it may just be best to use a few phillips…

view full answer...

Answer 3

Though we do have the Horse Trailer Side Pad #HTP1260BK that is 60" x 12", the widest 40" option we have will only be 9" ( #HTP40BK). What is going to be your best bet is to go with the Horse Trailer Escape Door Pad #HTP12BK,…

view full answer...

Answer 4

Yes. You will have to use the Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 on your 2021 Grand Design Reflection 337RLS. As far as which Curt Flexair works for your trailer, it depends on what pinbox you currently…

view full answer...

Answer 5

Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…

view full answer...

Answer 6

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

view full answer...

Answer 7

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

view full answer...

Answer 8

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

view full answer...

Answer 9

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…

view full answer...

Larger Horse Trailer Side Pad Recommendation than part # HTP40BK

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching