bing tracking image
Q & A Icon

Installing Tekonsha Brake Controller On A 2020 GMC Savana Cutaway  

Question:

I have a 2020 savana cutaway, trying to find a brake signal wire for a brake controller. The factory harness is not powered unless I disassemble the fuse box under hood, any assistance would be greatly appreciated.

0

Expert Reply:

I can definitely point you in the right direction. These Savana models can be tricky when installing a dash mount brake controller like the Tekonsha P2 # 90885.

If the vehicle has the factory tow package with a 7 way plug, there should be a blue wire for output run under the dash. It would be located near the emergency brake pedal. Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall. Those wires would be labeled which is which, but may not be color coded.

If you do not have a factory trailer connector, you will need to install a 4 pole T harness like # C56496 and also a brake controller install kit # ETBC7. This will be everything you need to wire the vehicle with a 7 way plug, and install a brake controller.

expert reply by:
0
Jesse M

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>