7k Axle Hub/Drums Leaf Springs and Equalizer Kit

Question

Question:

Hello, I am looking for 2 7,000 pound Dexter style axles, complete with drums, brakes, bearings, and suspension and mounts. The current spring to spring center is 64, and hubface to hubface without drums of 70.

asked by: Lee T

0

Expert Reply:

I wish we had the axle configuration you are looking for but we do not. Best option would be to find a local trailer shop to you who can order in axles custom. We can help with everything else you mentioned though.

Hub/drum # 42866UC3-EZ comes with bearings
For brake assemblies part # 23-464-465 are correct and self adjusting
For a 7k axle leaf spring we have the # e64SR
For a equalizer kit # K71-359-00
U-bolt kit part # CE23003

expert reply by: Jameson C

0

Answer 1

I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler #DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the Demco…

view full answer...

Answer 2

I do have an option for you but latch repair kits are coupler specific and there are very few out there. Furthermore, the Lippert 2" Latch Coupler Repair Kit 678750 is no longer available and I know this isn't what you want to hear but the…

view full answer...

Answer 3

Yes, you will be able to use the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Zinc - 2-5/16" Ball - 12,500 lbs #D05557-95 with the Demco 50-Degree A-Frame Coupler #DM15349-52. The #D05557-95 is for 3" wide channels and has…

view full answer...

Answer 4

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.

view full answer...

Answer 5

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 6

The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…

view full answer...

Answer 7

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 8

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 9

In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…

view full answer...

Answer 10

The Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY99FR will help stabilize your Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers #325-GH-1623 but it won't lock it to your hitch receiver. It has a unique shape that won't be as easy to mess with…

view full answer...

7k Axle Hub/Drums Leaf Springs and Equalizer Kit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching