How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
Question:
In another thread on this site an expert said from semi to rv plug an adapter was needed, and a different expert said just the recepticles are needed.do i need an adapter, and which one to haul trailer with 7 way flat rv type plug with a semi tractor. Thanks.
asked by: Todd
Expert Reply:
Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer.
If you need to keep the 7-Way semi active on the truck, then you would need to make an adapter to get it to work with an RV 7-Way. For that you would need a trailer side 7-Way round, # PK11702, a converter, # RM-732, and a vehicle side 7-Way RV style, # PK12-707E.
A semi-7-Way has separate circuits for the brake lights and each turn signal. And RV style 7-Way has the brake lights combined on the same circuit. So, what you would do is use a circuit tester such as # PTW2993 to determine the functions of the 7-Way on the tow vehicle. Then you would place the red wire from the converter to the appropriate spot on the back of the trailer side 7-Way round for brake lights. Do the same with the green wire for right turn signal and the yellow wire for left turn signal.
You will also need additional wire to attach to the back of the 7-Way round for the other functions needed. For ground and 12 volt power you can use # 10-2-1. For running lights you can use # 16-1-1, and for electric trailer brakes use # 10-1-1.
On the output side of the converter you will attach the wires to the back of the vehicle side RV 7-Way. The green wire will attach at the 9 o'clock position, yellow goes to the 3 o'clock position. Ground goes to the 5 o'clock position, 12-volt power goes to 11 o'clock position. Running lights goes to the 1 o'clock position. The center pin is for reverse lights which is uncommon on many trailers. But if needed you will attach some wire to the appropriate pin on the 7-Way round pin and attach it to the center pin on the back of the RV style 7-Way.
I would then wrap up the whole sha-bang in electrical tape and voila; you just made an adapter.
The alternative is to replace the 7-Way round pin on the vehicle with a 7-Way RV style connector. You could still use # PK12-707E and converter # RM-732. What you would do is remove the 7-Way round and then use the circuit tester to determine the functions of the wires. After that you would hook up the converter wires and other wires as explained above and mount the new 7-Way to complete the installation.
Products Referenced in This Question
Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Wiring
- Wire
- Jacketed Wire
- 2 Wire
- 10 Gauge
- Deka
more information >
Pollak HD, 7-Pole Round Pin Connector w/Cable Guard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 7 Round - Round
- Pollak
more information >
Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Roadmaster Brite-Lite Wiring Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- Roadmaster
more information >
Product Page this Question was Asked From
Hopkins Endurance Universal 5th Wheel/Gooseneck 7-Way RV Extension Cord - 8' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 8 Feet Long
- Universal Fit
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Brake Controller
- Shop: Roadmaster Brite-Lite Wiring Converter
- Q&A: Converting a Semi 7-Way Trailer Connector to an RV 7-Way Trailer Connector
- Shop: Trailer Wiring
- Shop: Pollak HD, 7-Pole Round Pin Connector w/Cable Guard
- Shop: Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket - Vehicle End
- Shop: Cordless Circuit Tester
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Video: Review of JR Products RV Locks - Chrome Locking L-Shaped Handle - 37210895
- Video: Roadmaster Brite-Lite Wiring Converter Installation - 2003 Fleetwood Discovery Motorhome
- Shop: Gooseneck Hitch
- Q&A: Semi Trailer Light Function Locations on Heavy Duty 7-Way Pin Connection
- Shop: Fifth Wheel Hitch
- Shop: Suspension Enhancement
- Q&A: Can Electric Brake Controller Install and Function in Semi Truck with Air Brakes
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Video: EZ Connector to 7-Way RV Adapter Review
- Search Results: hinge
- Search Results: door cables
- Video: Review of Hopkins Wiring - Trailer Connectors - HM48847
- Search Results: tarp
- Video: Curt Tow Bar Wiring C56196 Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL65CAB Review
- Search Results: battery boxes
- Search Results: floor screws
on Trailer Wiring
