Will The Brophy Clamp On Camper Tie-Downs HSBP Fit My 2016 Ram 3500 Long Bed?

Question

Question:

Would these fit a 2016 ram 3500 with a long bed tradesman edition? Im using an Arctic fox 990?

asked by: Pete

0

Expert Reply:

Yes, the Brophy Clamp On Camper Tie-Downs # HSBP will be a good fit for your 2016 Ram 3500. These will fit virtually any truck as long as the bed rail is less that 5-1/2" wide, and you have at least 2" of space beneath lip of bed rail. So unless your Ram has the Rambox storage system these will fit nicely. We also have the turnbuckles available if you are in need. Brophy also makes the basic turnbuckles # TDHP, which will work nicely for your Arctic Fox 990.

expert reply by: Jesse M

0

Answer 1

I can tell you some quick measurements to take to determine if the Brophy Clamp On Camper Tie-Downs #HSBP will fit your 2006 Dodge Ram, but these are universal tie-downs and there is not an application guide specific to your truck. That said, it is…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 7

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 8

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

view full answer...

Answer 9

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 10

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

view full answer...

Will The Brophy Clamp On Camper Tie-Downs HSBP Fit My 2016 Ram 3500 Long Bed?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching