Will MaxxAir RV Roof Vent Cover Fit 12 x 12 Roof Vent

Question

Question:

will your maxx air vent cover fix a 12 x 12 roof vent?

asked by: Lavon B

1

Helpful Expert Reply:

I believe instead of fix you meant fit, and yes, the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933069 willf it over a 12" x 12" roof vent.

expert reply by: Kyle S

1

Answer 1

No vent cover on the market is tall enough to let the vent to fully open lid, but this is known by the manufacturers who all state that the covers allow the lids to open enough for the vent to properly operate. Powered lift vents should stop once…

view full answer...

Answer 2

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 3

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 4

For a 29.5" doorway with a 36.5" stair height I recommend the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps item #MR28RR. These steps are for entryways with a doorway width (from inside flange to inside…

view full answer...

Answer 5

We have a large selection of RV steps available that may work great on your 2016 Forest River Prime Time Crusader. When trying to locate a step assembly that will fit your trailer, you will first want to determine the mounting base measurements of…

view full answer...

Answer 6

Since the distance from your threshold to the ground is 38", and the narrowest part of your door is 28-1/4" side-to-side, the MORryde steps that are a fit for you are the MORryde #MR28RR steps featuring 8" deep steps. Optionally you…

view full answer...

Answer 7

The correct Timbren Suspension Enhancement System for your 2019 Ford F-350 Super Duty is the #TFR350SDJ. The #TFR250SDJ only fits the F-250. Unless you have altered your suspension this should fit as intended by the manufacturer. Ideally you want…

view full answer...

Answer 8

I would recommend sticking with the amount of space you have now with your Timbren #TFR250SDJ because if you use a spacer to take up any more space you'll end up with a harsher ride quality. What you can do is try it without the spacer and see if…

view full answer...

Answer 9

The Timbren kit #TFR250SDJ does not require a mounting plate above the axle as it is designed to contact the round the plate that is currently on the axle that is mounted below the spring pack. I would recommend sticking with this kit even though you…

view full answer...

Will MaxxAir RV Roof Vent Cover Fit 12 x 12 Roof Vent

Product Page this Question was Asked From

Continue Researching