bing tracking image
Q & A Icon

Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place  

Question:

2021 260RD, I have 4 point Lippert 3.0 levelers. The levelers behind rear tore are 24 inch. This makes my depature angle bad and gives me aboit 4 inches clearance from ground to bottom of foot pad. I want to replace with 22 inch leveler to give more clearance. My question: Does the 22 inch come with foot pad attached by pin and not welded? If so part info please. I am concerned using welded foot pad on 4 point system. thanks

0

Expert Reply:

The foot pad of the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System # LC428493 is welded to inner tube to jack to help shorter the total height for more clearance. The original model has the inner tube a bit longer to allow for room for a pin and clip. Unfortunately there currently isn't a shorter model with a pin & clip design.

In the attached video below Dave will go over this starting at the 2:20 minute mark.

expert reply by:
0
Kevin C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>