Replacement Right Rear Jack for Lippert Ground Control 3.0 of Grand Design BHS 311

Question

Question:

Is this the right jack for replacing our right rear jack for a grand design reflection BHS 311 camper?

asked by: Jacki

0

Expert Reply:

If your Grand Design Reflection BHS 311 has the Lippert Ground Control 3.0 electric leveling system the correct replacement right rear leg is the part # LC428493 that you referenced.

expert reply by: Jameson C

0

Answer 1

I reached out to Lippert to confirm that you can change out your 24-1/2" rear jacks that come with the 4-Point Lippert Ground Control 3.0 #LC358590 with the Short Left Rear Leg #LC342610 and Short Right Rear Leg #LC428493. They confirmed that…

view full answer...

Answer 2

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

view full answer...

Answer 3

Yes, the Replacement Right Rear Leg #LC344792 is the correct unit to replace the rear passenger side jack on your Lippert Ground Control 3.0 System. I reached out to my contact at Lippert and he said there aren't any specific torque specs that…

view full answer...

Answer 4

The foot pad of the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 is welded to inner tube to jack to help shorter the total height for more clearance. The original model has the inner tube a…

view full answer...

Answer 5

I was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC342610 (428493)…

view full answer...

Answer 6

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 #LC305339 has the following dimensions: 9 inch diameter foot plate 23-1/2 inches tall without foot plate 8-1/2 inches wide at widest point…

view full answer...

Answer 7

I do see that the Lippert Ground Control #LC358590 leveling system was an option on the 2019 Grand Design Reflection 150 295RL 5th wheel camper so you will not have any fit issues with the leveling system. There are some campers that are unable to…

view full answer...

Answer 8

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

view full answer...

Answer 9

Assuming that you have the Lippert Ground Control 3.0 stabilization system you can replace your current rear jacks with the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 as they will be a…

view full answer...

Answer 10

I have a short-leg solution for you. I went ahead and reached out to my contact at Lippert, and she confirmed that, unfortunately, the shorter 22.5 inch legs for the Lippert Ground Control 3.0 system must be ordered individually. We do carry both the…

view full answer...

Answer 11

If you're getting a RR or LR fault code with your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote #LC358590 or #LC675817, then that is indicating that there is an error at that specific jack (right rear /…

view full answer...

Answer 12

The matching right rear leg that is in the short size for the Lippert Ground Control is the part #LC428493 that you referenced. This is same size as the left side part #LC342610 that you have now.

view full answer...

Replacement Right Rear Jack for Lippert Ground Control 3.0 of Grand Design BHS 311

Product Page this Question was Asked From

Continue Researching