Will Curt Trailer Hitch Receiver Fit Behind Bumper Cover When Not Needed 2023 Jeep Grand Cherokee?

Question

Question:

2023 Jeep Grand Cherokee Hitch receiver Will the Bumper Trim piece pop back on once the hitch is installed? To hide the Hitch and give a clean look?

asked by: Doug A

0

Expert Reply:

Yes, you will be able to reinstall the bumper trim cover over the Curt Trailer Hitch Receiver # C96NR on your 2023 Jeep Grand Cherokee. This receiver was designed to fit like the factory receiver and hide behind the rear cover when not needed. It will also hide the T-One Vehicle Wiring Harness # TK39VR which you can attach to the receiver using the Mounting Brackets # 18140 & # BK4F.

expert reply by: Bud M

0

Answer 1

We spoke with Curt about the Curt Trailer Hitch Receivers for a 2022 Jeep Grand Cherokee L, part #C97JR and part #C96NR. The latter is an updated design which was done to offer more fit options. So basically they made another part number to fit…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver part #C96NR is a confirmed fit for a 2023 Jeep Grand Cherokee. It's also a confirmed fit for a 2023 Jeep Grand Cherokee L not that it matters. It fits both the Grand Cherokee and Grand Cherokee L so there will…

view full answer...

Answer 3

The best hitch for your 2023 Jeep Grand Cherokee is going to be the Curt Trailer Hitch item #C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This only fits the 2023 Jeep Grand Cherokee not other models. I really like…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C96NR does fit your 2023 Jeep Grand Cherokee L with a full size spare tire, but you would not be able to keep the spare tire stored after the hitch is installed, which is what I think you were referring to. For…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...