Drop and Mounting Hole to Hitch Opening Face of Curt # 14080

Question

Question:

What is the of the14080? Also what is the distance from the front tip of the receiver to the the first bolt hole?

asked by: Jack B

0

Expert Reply:

On the Curt hitch # 14080 the rear hole to the receiver face is 14.36 inches. From the frame to the top of the receiver is 1.85 inches.

expert reply by: Jameson C

0

Answer 1

I do not recommend attempting to pull a 5th wheel with that vehicle. The Avalanche may have adequate towing capacity for smaller 5th wheel campers. My main concern is configuration of the truck bed and that it would not allow turning clearance. That…

view full answer...

Answer 2

For a receiver hitch, I'd recommend the Curt Class IV, part #14080 which has a 10000 lb towing/1000 tongue weight capacity or 12000 towing/1200 lb tongue weight capacity if used with a weight distribution system. These capacities would be ideal…

view full answer...

Answer 3

The instructions are referring to the bolt diameter and not the head size for the torque specs of the Curt Trailer Hitch Receiver #14080. The Carriage bolts and nuts are going to be 1/2" diameter while the bolts that thread into the weld nuts on…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...