Is the Universal Cam-Door Lock # 383200 Made of Steel and Mounting Hole Spacing of Cam Bracket

Question

Question:

On the pipe to be supplied by the customer, you say to use steel pipe. Does that mean the hooks in the kit are steel as well as the handle? We can weld steel to steel. The parts we are replacing are aluminum. Also, what is the distance between the mount holes for the hook pockets?

asked by: Scott K

0

Expert Reply:

I went out to the warehouse and pulled a Universal Cam-Door Lock # 383200. I used a magnet to determine the parts are steel but the grade of steel is not listed.

For the bracket that the hooks part would go into the mounting holes are 4 inches apart on center.

expert reply by: Michael H

0

Answer 1

The Redline Universal Cam-Door Lock, #383200, will work great for your 36 inch wide doors on your trailer. You will want to use a steel pipe with an inner diameter of 3/4 of an inch and an outer diameter no wider than 1-1/8 inches. The pipe will…

view full answer...

Answer 2

Yes, the cams (as well as the handle) need to be welded to a 34" Schedule 40 Plumbers Pipe with a 1.06" outer diameter for proper installation of the Cam-Action Lockable Door Latch Kit #383200. To keep the pipe from dropping down…

view full answer...

Answer 3

The Polar #PLR158 with 2 inch keeper is made of steel construction. The #PLR158 takes 3/4 inch I.D. sized pipe. If you prefer a 1 inch keeper the Polar #383200 is also made of steel construction and takes a 3/4 inch I.D. sized pipe.

view full answer...

Answer 4

A cam-door lock will work great for what you are building. The 55" Lock Side-Door Bar Lock Assembly, #3057-55, will only give you a portion of the assembly you need. I recommend the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper,…

view full answer...

Answer 5

For the barn door on your dump trailer, I recommend looking at the Cam-Action Lockable Door Latch Kit #383200. This is a nice steel cam-action door latch with a 1 inch wide hasp that can be installed flush on doors with a 3/4 inch offset. It features…

view full answer...

Answer 6

Installing the Hinges on your Side-Door Bar Lock Assembly, item #305736, is pretty much up to you and the construction of your trailer. You will need to purchase appropriate hardware to install the Side-Door Bar Lock that you purchased. It is best if…

view full answer...

Answer 7

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 8

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

view full answer...

Answer 9

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…

view full answer...

Answer 10

The only 3-1/8" shackle kit we carry from Dexter is the #K71-358-00 which is for a single axle trailer. If you are in need of a complete kit for a tandem axle trailer, we recommend the MORryde Suspension Upgrade Kit #MR76ZR. This will come with…

view full answer...

Answer 11

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 12

On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…

view full answer...

Is the Universal Cam-Door Lock # 383200 Made of Steel and Mounting Hole Spacing of Cam Bracket

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching