Does Replacement M6 x 35 Square Head Bolt # TH33RV Fit Thule Probar Evo

Question

Question:

So these fit the top track on the Thule Probar Evo’s?

asked by: Dave M

0

Expert Reply:

Yes, the Replacement M6 x 35 Square Head Bolt # TH33RV does fit the top channel of the Thule ProBar Evo crossbars.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement M6 x 40 mm Rectangular Head T-Bolt for Rhino-Rack Accessories #RR69HB will fit the T-slots on the TS rails.

view full answer...

Answer 2

The T-slot channel on the TS Rails #TH65FR is 1" wide x 1/4" tall and 1/2" wide at the opening on top of the channel. There is no exact size, it just needs to be able to fit the channel. A lot of companies list parts as fitting the…

view full answer...

Answer 3

The Replacement M8 x 16 mm Rectangular Head T-Bolt for Rhino-Rack Accessories #RR89HB is designed to replace any M8 x 16 mm t-bolt so if the t-bolt on your TS Rails for TruXedo Elevate Rack System #TH65FR has the same measurements it'll work, but…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Does Replacement M6 x 35 Square Head Bolt # TH33RV Fit Thule Probar Evo

Product Page this Question was Asked From

Continue Researching