Rhino-Rack Vortex Aero Crossbars Installation - 2009 Ford F-150 Video

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

For a roof rack/crossbar setup that fits the tonneau cover channels you have on your truck the Rhino Rack Vortex Crossbar Setup part #RRVA180B-RRRLT600 that you referenced is what I would go with if I were you. This gives you a higher quality setup…

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to…

Hey Parvez, glad I could help! So the Rhino Rack Vortex Crossbars for Retrax XR tonneau covers part #RRVA180B-RRRLT600 was designed specifically to work with your RetraxOne XR tonneau cover so it is going to definitely have enough clearance above…

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

The RetraxPRO XR Hard Tonneau Cover that fits the 2019 Toyota Tundra 5-1/2-foot bed with the deck rail system is part #RTT-80841 and this cover can be fitted with 65-inch Rhino-Rack crossbars. Order #RRVA165B-RRRLT600. Install instructions are linked…

We do have the parts needed for a Thule Wingbar EVO to fit the slots of a Retrax cover but not as a complete kit. Here's what you'd need: 60" WingBar Evo Crossbars - #TH711520 Evo Clamp Feet - #TH710501 Fit Kit - #TH29TX Lock Core Kit -…

I'd be happy to recommend a cargo carrier to fit with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 on your 2022 Ford F-250 Super Duty! I really like the 53" x 49" Yakima OffGrid…

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 will fit the Roll N Lock tonneau cover with XT rails.

I did see the review saying they used spacers, though that is the only time we have ever come across this, so I wouldn't say yes, spacers are going to be needed to use the Rhino-Rack system, which is the following part number: - Rhino-Rack Vortex…

The most cost effective Rhino-Rack setup for a Rextrax XR Tonneau Cover is the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600. If you're interested in the ProBar Evo, that is…