Trailer Grease Seal to Replace 127194TB

Question

Question:

WHICH GREASE SEAL DO I NEED FOR BEARING NUMBER /L44649, GREASE SEAL HAS THIS NUMBER ON IT 127194TB made in China

asked by: Vlad

0

Expert Reply:

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part # RG06-010, which is a double-lip seal sold as a pair. Its outer diameter is 1.983-inches and its inner diameter is 1.249-inches. These have a spring to maintain a good seal around the spindle.

expert reply by: Adam R

0

Answer 1

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 2

For your Dico Hub 45263, you are going to want to use part #L44649 for both the inner/outer bearings and part #168255TB for the grease seal which has a double lip. I was not able to confirm that the hub uses different inner and outer bearings.…

view full answer...

Answer 3

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to…

view full answer...

Answer 4

The key for selecting a replacement grease seal is the reference number, in this case #10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is…

view full answer...

Answer 5

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 6

Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649 you'd want…

view full answer...

Answer 7

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

view full answer...

Answer 8

Most of the 8-259 Dexter hubs use L44649 inner and outer bearings. For that you would need bearing kit #BK1-150. The seal included with this kit has an inner diameter of 1.50 inches. I have linked a video showing an example installation.

view full answer...

Answer 9

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 10

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

view full answer...

Answer 11

I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249"…

view full answer...

Answer 12

Yes, the CE Smith Trailer Hub part #CE13511 will fit as a replacement for your DICO hub 45264 but you will need to use a different seal as we have found that your spindle diameter is slightly different which means you need the #168255TB as well.

view full answer...

Trailer Grease Seal to Replace 127194TB

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching