Can Ford F-150 with 5-1/2 ft Bed Tow Trailer with Locked Out Sidewinder Pin Box

Question

Question:

I have a few questions abort our hitch on our 2021 Ford 150 with a 5 1/5 foot bed we have a Reese airborne sidewinder and it is very tough to hook up boot the wedge you have to be perfect inline. We were wondering if we could install the 2long bolts in the back and make it a ridged hitch and let it turn on the 5rh wheel plate The second question I have is would a super glide 2700 hitch work in the bed or do we need the model # 3200 Thanks for your help

asked by: David H

0

Expert Reply:

Since your truck has a 5-1/2 foot bed you would not be able to lock out your Sidewinder and use it like a standard pin box as the nose of the trailer would hit the cab of the truck around corners. You really need the additional turning clearance that the Sidewinder provides. It's possible you are using the wrong wedge with your current hitch and that's why it's hard to connect to your trailer. If you let me know what hitch you have I can verify for you the correct wedge.

The Superglide slider hitches you mentioned do not slide back far enough to allow you the needed turning clearance.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 6

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 10

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 11

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 12

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Can Ford F-150 with 5-1/2 ft Bed Tow Trailer with Locked Out Sidewinder Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching