Will Pullrite SuperGlide 2700 Fit a Reese 5th Wheel Trailer Hitch Install Kit for a 2013 Ford F-150

Question

Question:

Will these rails work with the PullRite 2700 supeglide? I have a 2013 F150 5.5 bed

asked by: Jeff P

0

Expert Reply:

From what I found the PullRite SuperGlide 2700 is one of the models that fits industry standard above the bed rails. Semi-custom installation kit # RP30035-426 does come with industry standard rails so it will fit the hitch and your 2013 Ford F-150 with 5-1/2 foot bed.

expert reply by: Michael H

0

Answer 1

The Curt Custom 5th Wheel Installation Kit 16424-104 is designed to fit the 2011 to 2016 Ford F-250, F-350, and F-450 Super Duty trucks. I checked with Curt and, unfortunately, they currently do not have a kit available to fit the 5-1/2 foot option…

view full answer...

Answer 2

Yes, the B and W fifth wheel rails part #BWRVK2404 are the industry standard fifth wheel rails that your Reese hitch is designed to fit.

view full answer...

Answer 3

I always recommend people go with a custom fit rail kit for their truck as they reduce install time and the amount of vehicle drilling required when compared to a universal kit. For your 2013 Ford F-150 short bed I have a great recommendation. For…

view full answer...

Answer 4

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item #BWRVK2404 will work with your B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000lbs Item #BWRVK3200 and is a custom fit for your 2013 Ford F-150 so it will…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Will Pullrite SuperGlide 2700 Fit a Reese 5th Wheel Trailer Hitch Install Kit for a 2013 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching