Will the Yakima BackSwing Swing Away Hitch Extender Fit With Thule T2 Pro X Bike Rack?

Question

Question:

Will the Yakima backswing extension work with the Thule T2 Pro X, not the XTR?

asked by: Katie

0

Expert Reply:

Yes, the Yakima BackSwing Swing Away Hitch Extender # Y02483 will work with the Thule T2 Pro X Bike Rack # TH83GC.

expert reply by: Bud M

0

Answer 1

As long as your Thule T2 Pro XTR is only for use in a 2" hitch, like the #TH83JV, the Yakima BackSwing Swing Away Hitch Extender #Y02483 will work perfectly. However, if your T2 Pro uses a 2" adapter on a 1-1/4" shank, like the…

view full answer...

Answer 2

The Roadmaster Dual Hitch Receiver Adapter #RM-077-10 weighs 29lbs.

view full answer...

Answer 3

Yes, the Thule T2 Pro XT can work on your 2007 Toyota FJ Cruiser. Unfortunately, you will have to get an additional item for it to work. You will need to add a hitch extender to use this hitch bike rack. I recommend the RockyMounts Hitch Extender w/…

view full answer...

Answer 4

Sure is. You need part #RM-077-6 which has a rise or drop of 6 inches depending which way you use it. It's exactly like part #RM-077-8 except for the amount or rise/drop.

view full answer...

Answer 5

Using the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches #Y02483 with your 2020 Mercedes-Benz AMG G63 so that you can have full access to your rear doors when needed is a well-thought out strategy. Actually, the Yakima…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Will the Yakima BackSwing Swing Away Hitch Extender Fit With Thule T2 Pro X Bike Rack?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching