Curt Folding Hitch Cargo Carrier Review Video

Both of the Curt hitch-mount folding cargo carriers #C18151 and (Discontinued) C18153 fit in a 2-inch hitch and offer a 500-lb loaded cargo weight capacity. The primary differences are the carriers' weights and the type of shank on the carriers.…

We currently offer several different hitches for the 2022 Subaru Ascent. Two that are concealed that will be hidden behind the removable panel on the bumper when not in use, and two that sit below the rear bumper and will be fully visible from the…

The Roadmaster Dual Hitch Receiver Adapter #RM-077-10 weighs 29lbs.

The picture I attached that you referenced shows how the shank of the 20x59 Curt Cargo Carrier part #C18151 should be installed. If it was installed opposite of this it would not fold up.

I went and grabbed a Curt Cargo Carrier part #C18151 to grab the pin hole dimensions you requested. From the pin hole to the end of the shank that slides into the hitch it measures 2-1/2 inches and from the pin hole to the nearest rails of the…

To measure clearance for an accessory installed in the hitch on your FJ you will want to measure from the center of the hitch pin hole rearward to the back edge of the spare tire, which is usually the rear-most part of the vehicle. I linked a helpful…

Sure is. You need part #RM-077-6 which has a rise or drop of 6 inches depending which way you use it. It's exactly like part #RM-077-8 except for the amount or rise/drop.

As long as your Thule T2 Pro XTR is only for use in a 2" hitch, like the #TH83JV, the Yakima BackSwing Swing Away Hitch Extender #Y02483 will work perfectly. However, if your T2 Pro uses a 2" adapter on a 1-1/4" shank, like the…

We do have an inexpensive folding cargo carrier that would work perfectly for you, the #C18151 from Curt. This carrier, at 20x59 is actually a bit larger than the Rola carrier you mentioned, and it's considerably less expensive. You will need to…

We do indeed carry Optronics products. The number you provided is a DOT reference number, and does not denote the part number of the lamp or the lens. However we had a picture sent in once from a guy of the housing of the light he needed a lens for…

We have a cargo carrier for trailer hitches made in the USA; what you are looking for is the Thule Arcos Enclosed Cargo Carrier - 1-1/4" and 2" Hitches #TH25YE.

Typically, a hitch will prevent the sensors used by the hands free liftgate system from picking up movement directly in the center, but will still pick up movement to one side or the other. We've received varied reports saying that some of the…