Solution for Trailer Hitch on 1996 Toyota Hilux

Question

Question:

Correct trailer hitch application for a 1996 Toyota Hilux. Japanese import, RH drive, 4x4, diesel with 40 between frame rails in the rear

asked by: Mark D

0

Expert Reply:

I do have a solution, but there are no custom fit hitches for the 1996 Toyota Hilux. The only option is to use a universal hitch like the Curt Class 5 # C47CR. This weld-on hitch fits vehicle frames up to 44". We recommend taking it to a certified welder for installation.

expert reply by: Robin H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The EcoHitch Hidden Trailer Hitch Receiver #EH35VR may interfere with the Hands-free Liftgate sensor like all of the other hitches. Typically this means you will need to place your foot on either side of the receiver tube in order to activate the…

view full answer...

Answer 5

The trailer hitches we have available for the 2014 GMC Savana Van are designed to fit the full size van model. To see if these will fit your Cutaway version, I just recommend taking a couple measurements on the vehicle's frame. The trailer hitch…

view full answer...

Answer 6

The Draw-Tite Class III hitch you mentioned, part #41946 will fit a 2005 Chevy Express, but I couldn't say if it'll fit a motorhome on a cutaway van chassis. Usually the rear bumper structure at the rear of a motorhome is much different that…

view full answer...

Answer 7

I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…

view full answer...

Answer 8

According to the information I found in the owner's manual for the 2016 Fiesta, the vehicle can indeed be flat towed. You'll want to look over the procedures outlined on page 152 of the owner's manual, and follow them exactly. The…

view full answer...

Answer 9

I went out to the warehouse with a handful of sockets to see which size fits over Flange Wheel Nut - 5/8" Item #95188. It takes a 1-1/8 inch socket. I have linked a video review of this nut for you.

view full answer...

Answer 10

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

view full answer...

Answer 11

You're not the only one who is at a loss, as Hyundai has made a bit of a mess of this whole thing with trailer wiring for the 2023 Hyundai Palisade - not to mention previous years. So I dug into this and there isn't an easy plug-in option for…

view full answer...