Trailer Hitch Installation - 2000 Toyota Tacoma - Curt Video

The speed rating limitation for a trailer will come down to the tires, it has little to nothing to do with the axle, hub, or wheel size. That said, smaller tires generally do have lower speed ratings but you do not need to upgrade the wheels on…

I checked the install instructions for the Curt Hitch part #13013 and you have to unbolt the bumper brackets and remove the bumper.

There are actually 6 bolts connecting the CURT trailer hitch #13013, to the frame on the 2002 Toyota Tacoma, and the factory bumper will need to be removed and reinstalled to complete the installation. This will require disconnection and…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

I spoke with TorkLift about the TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2018 Toyota Tacoma and they stated they have not done any testing on the TRD. That said, it looks like the only issue would be the factory nerf bars so if these are…

OK, You will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2306. As well as the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLR3500. With the Rear tie down #TLR3500 you will need to make sure your hitch receiver has…

Yes, the Curt hitch part #13013 that you referenced does fit a 1999 Toyota Tacoma 4WD like you have. I attached an install video for this for you to check out as well.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

We have two options for front mount hitches specifically designed for your 2003 Toyota Tacoma and neither of them state that the skid plate will have to be removed for installation. First is the Curt Hitch, #C31013. This hitch mounts to the bottom of…

Thule used mounting hardware #TH04997 for the Cascade cargo box. If you have the Cascade XT then you will use #43216. Simply compare both of these to your existing hardware to choose the correct one. The hardware isn't cross compatible, so…

Since you drilled the lock out you will need a new lock cylinder and key. I recommend a lock cylinder like part #THLOCKN077, and then you will need the key so you can order part #THKEYN077. Since the keys are sold individually you may want to order…