Does Curt 4-Way For 2017 Chrysler Pacifica Limited Work Without Being Connected to Battery

Question

Question:

Will the C56399 work without being connected to the vehicle battery when towing a Uhaul trailer? My vehicle is a 2017 Chrysler Pacifica Limited without factory hitch.

asked by: Marvin R

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness # C56399 does not fit your 2017 Chrysler Pacifica Limited, it is for the LX and Touring models; the correct part for your Limited is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56322.

This connector will not work without being connected to the battery as this is how the converter is powered. So that is a necessary step, and the only other thing you'll need for towing is a hitch, the Trailer Hitch Receiver # e98903.

expert reply by: Kyle S

0

Answer 1

For your 2020 Chrysler Voyager that has the seventh VIN digit as D the correct trailer wiring install harness is the Curt #C56399.

view full answer...

Answer 2

While the Yakima HoldUp Bike Rack #Y02443 has an anti-rattle setup you will also want to add one to the Curt Multipurpose Ball Mount #D210. The Curt Anti-Rattle Kit #C69HR will fit into the hollow shank on the Multipurpose Ball Mount and allow you to…

view full answer...

Answer 3

Yes, I can confrim for you that the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56399 WILL fit your 2017 Chrysler Pacifica LX. This connector fits both the LX and the Touring models and will work for you.

view full answer...

Answer 4

We can definitely get your 2022 Chrysler Pacifica Touring set up with a Class III, 2 inch trailer hitch receiver as well as a 4-way wiring harness. Let's go ahead and start with the hitch, and the correct fit is from Curt: - Curt Trailer Hitch…

view full answer...

Answer 5

I can sympathize as rattling can be just a nightmare when all you want to do is get from Point A to Point B in relative peace. I highly recommend going with an anti-rattle for your 2 inch hitch to help stop the racket, and the best option is from…

view full answer...

Answer 6

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56322 is the only fit from Curt for your 2017 Pacifica Limited. The Curt #C56399 you ordered is only a fit for the LX and Touring trim models so it will not fit your…

view full answer...

Answer 7

This can be frustrating, but I have a solution for you. If your hitch has a lip or collar around the opening, the Roadmaster Quiet Hitch #RM-061 is going to be perfect for you. You can use this clamp when towing a load, carrying a bike rack and also…

view full answer...

Answer 8

A four-pole connector is the connector that gets connected to the trailer wiring from the tow vehicle. It is called a 4-pole connector because the connector has 4 poles that carry 4 different tail light circuits. Most people will store the 4-pole…

view full answer...

Answer 9

Curt has a trailer wiring kit that is a fit for your 2020 Chrysler Pacifica Limited but it's the part #C56322 and not the #C56399 that you referenced. Curt also has a hitch that fits your vehicle too with the part #C13383 as well.

view full answer...

Answer 10

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 11

Yes, the Curt Anti-Rattle Kit for Hollow Shank #C69HR will hold up when pulling your equipment trailer. This will only work on ball mounts for a 2" receiver with a hollow shank. I feel the Blue Ox Hitch Receiver Immobilizer II #BX88224 is the…

view full answer...

Answer 12

The Draw Tite hitch part #76046-SK that fits your 2018 Chrysler Pacifica Hybrid comes with all needed install hardware. You would not need anything else to complete the install.

view full answer...