How Much Space Should There Be with Timbren Active Off-Road Bumpstops On 2007 Toyota Tacoma  

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1"…

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

The Timbren kit part #TGMRCK25D that fits your 2022 Chevy Silverado 2500 would require the lift spacers that have a 3/8 inch diameter bushing hole like the part #A25723-90AH00 which is 1 inch thick or the #TA25722-90P00 for a 1/2 inch diameter…

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. I have included a link to a video showing installation of this kit for you.

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…

Yes Tarek, the Timbren Suspension Enhancement System #T75MR will work fine with your 2023 Ford Raptor.

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there…

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require monitoring…

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

When installing any Timbren system on the 2019 Toyota Tacoma you should have about 1/2" to 1-1/2" between the frame and the spring after installation. You won't necessarily be losing wheel travel when you use a Timbren Rear Suspension…