Review of Timbren Vehicle Suspension Spacer - A25723-90AH00 Video

While the spacers included in the Kit #T68MR will work with your Timbren Springs #TGMRYS4 they do not use the same mounting bolts. Your GMC Yukon uses 3/8" hardware while the spacer kit includes M10 hardware so you would still need to source…

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1"…

SumoSprings Solo Helper Springs unfortunately aren't really designed for lifted trucks and the manufacturer only recommends using up to a 2" spacer so the #SS65FR isn't going to be the best solution for you. Instead you'll want to go…

Since you have a 2.25 inch distance between the Timbren and the frame you'd want the 1 inch Timbren spacer part #A25723-90AH00 which will move that distance to 1.25 inch.

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

For a maintenance-free suspension enhancement option on your 2024 Silverado I recommend the SumoSprings Solo Custom Helper Springs #SS65FR. These have a weight capacity of 1,000 lbs, a microcellular urethane construction, and a lifetime warranty. The…

The SumoSprings Solo Custom Helper Springs part #SS45FR which is a fit for a 2021 GMC Sierra 1500 comes with a 1" spacer so it will work fine with a small lift but anything past 1" in the rear would render the system ineffective. That said,…

Yes, the Timbren Suspension Enhancement System #T28MR will be the best option when it comes to cost-effectiveness. This will fit with your 2021 Chevrolet Silverado 1500 Z71 Trail Boss but you'll want to make sure these fit the gap properly. The…

For a Timbren kit confirmed to fit your 2016 Toyota Tundra you'd want the part #TTORTUN4 with the 1 inch spacer #A25723-90AH00 since you have a 1 inch lift at the rear of your truck.

I went and measured the overall height of the rubber springs of the Timbren Rear Suspension Enhancement System #TGMRG25C and found it to be 6-1/2 inches tall.

Between the 1,500 lb SumoSprings #SS95GR and 1,000 lb SumoSprings #SS35GR that fit your 2023 Nissan Titan, the best option is the latter, the 1k springs: - SumoSprings Solo Custom Helper Springs #SS35GR The 1,000 lb capacity is more than enough…