Timbren Vehicle Suspension - Rear Axle Suspension Enhancement - TGMRYS4 Review Video

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

I recommend using the Fastway e2 Weight Distribution #FA92-00-0800 for your 7x14 Interstate Loadrunner tandem axle trailer. This hitch is rated for trailers up to 8,000lbs with a tongue weight between 400-800lbs. If your unloaded tongue weight is…

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1" to…

In terms of capacity, the Timbren Rear Suspension Enhancement System, #TGMRG25C, for a 2003 Chevy Avalanche 1500 has quite a bit more; a total capacity of 6,000 pounds. Compare that to the maximum 1,000 pound capacity of the Firestone Vehicle…

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

The Timbren kit part #TGMRCK25D that fits your 2022 Chevy Silverado 2500 would require the lift spacers that have a 3/8 inch diameter bushing hole like the part #A25723-90AH00 which is 1 inch thick or the #TA25722-90P00 for a 1/2 inch diameter…

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. I have included a link to a video showing installation of this kit for you.

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. You'll want an inch to an inch and a half of space between the frame/axle and…

What I recommend is going with the Timbren vehicle suspension #TGMRYS4 (2WD or 4WD)because the hollow rubber springs sit above the axle and they are easy to install. It will also be compatible with your auto-leveling system. Also, the Timbren…

It is not recommended to use any type of suspension enhancement when using a weight distribution system. The two systems will work against each other and would provide an unsafe, unpredictable ride quality. Your best option would be to make sure the…

For your 2018 Cadillac Escalade the Timbren Rear Suspension Enhancement System #TGMRYS4 will work great. These jounce-style springs are confirmed to fit your vehicle and will simply replace the factory bump stop on the frame to provide additional…