Timbren Rear Suspension Enhancement System Installation - 2011 Chevrolet Suburban Video

While the spacers included in the Kit #T68MR will work with your Timbren Springs #TGMRYS4 they do not use the same mounting bolts. Your GMC Yukon uses 3/8" hardware while the spacer kit includes M10 hardware so you would still need to source…

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1"…

For a towing application adding a supplemental transmission cooler to your 2008 Chevy Tahoe 5.3L V8 is an excellent way to reduce thermal stress and help prolong the life of your transmission. The OEM cooler (built into the radiator) is meant for…

According to the GMC Trailer Towing Chart your 2011 GMC Yukon XL has a maximum towing capacity of 8,300 lbs. Generally speaking if your gross trailer weight (GTW) is more than 50% of the gross vehicle weight rating (GVWR) than a weight distribution…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

The Timbren kit part #TGMRCK25D that fits your 2022 Chevy Silverado 2500 would require the lift spacers that have a 3/8 inch diameter bushing hole like the part #A25723-90AH00 which is 1 inch thick or the #TA25722-90P00 for a 1/2 inch diameter…

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. You'll want an inch to an inch and a half of space between the frame/axle and…

For your 2018 Cadillac Escalade the Timbren Rear Suspension Enhancement System #TGMRYS4 will work great. These jounce-style springs are confirmed to fit your vehicle and will simply replace the factory bump stop on the frame to provide additional…

If your Tekonsha P3 Brake Controller, part #90195, displays the error message OUTPUT SHORTED NO BRAKES, the potential causes are a short in the brake output circuit somewhere between the brake controller and the trailer brake assemblies, or a shorted…